MyRay Hyperion X9 Pro 3D
Made in Italy
Maximum flexibility for your diagnoses. Hyperion X9 pro is fully configurable and its modular and scalable design makes it possible to transition from a basic to a more advanced version in an easy and cost-effective manner. An extraordinary platform that adapts to the needs of your dental practice thanks to the 2D PAN/CEPH sensor that can be easily relocated and to the reversible teleradiographic arm which can be installed on both sides. The most compact 3-in-1 hybrid system available on the market for high-quality 3D examinations.
Advantages:
- Easily upgradable to every configuration
- Reversible CEPH arm
- Relocatable 2D sensor or two dedicated sensors for PAN and CEPH
- The most compact 3-in-1 system
MyRay Hyperion X9 Pro 3D
MultiFOV and high resolution: wonderfull 3D images for all your radiology needs.
- Extremely high resolution (up to 68μm)
- Fast CB3D scan (up to 3.4s)
- Low dose
Exceed every expectation.
The extraordinary details of 3D imaging for your high-resolution examinations.
3D imaging takes diagnoses to a higher level, an essential dimension to give more value to your job. Thanks to a wide range of fields of view (from 4 x 4 up to 13 x 16 cm), Hyperion X9 pro is the ideal tool to meet all your clinical needs, from the analysis of tooth structures to the examinations of temporomandibular joints and ENT applications.
SuperHD diagnosis.
MultiFOV and high resolution: wonderfull 3D images for all your radiology needs.
A wide range of FOV to meet any clinical requirement: from implantology to the measurement of airway volumes, from endodontics to oral surgery. All the FOV, from the smallest to the largest, are available in three execution modes to suit every need. Just a few steps are required to identify the most suitable setting according to the selected anatomical region. The innovative selection between the three dedicated modes allows the operator to carry out examinations based on the actual diagnostic needs and with extreme ease:
- QuickScan : Faster low-dose scans for post-surgery follow-ups and macro-structure analyses.
- Standard mode : Primary diagnosis and treatment planning. The best balance between dose and quality.
- SuperHD : Exceptional level of detail, without compromise. Ideal for the analysis of micro-structures. Smart CB3D.
Reach a new level.
Simple and versatile, but also technologically advanced.
Hyperion X9 pro integrates extraordinary innovations that bring the future of 3D diagnostics to your clinic. The very best of technological evolution for 3D diagnostics in your clinic. Hyperion X9 pro is equipped with an upgraded generator designed to give you optimal results in quick time and with a 3D sensor that delivers high-quality images with low irradiated dose. This next-generation technology, combined with optimised scanning protocols, makes it possible to achieve an extraordinary 68μm resolution.
WIDE 3D CONTROL PANEL
The technologically-advanced 3D control panel stands out for its exceptional sensitivity which allows for extremely detailed examinations. Volumes of complete dentition and upper airways in SuperHD quality for accurate diagnoses at all times.
UPGRADED GENERATOR
The constant potential generator, equipped with a focal spot of just 0.5mm, optimises exposure thanks to the pulsed emission technology thereby ensuring the best results with the lowest irradiated dose.
FAST 360-DEGREE SCAN
The main advantage of 360-degree scanning is a considerable reduction of artifacts. Hyperion X9 pro combines this type of acquisition with extremely fast execution times. In just 14” it is indeed possible to carry out complete high-resolution examinations at low X-ray doses: excellent quality, detailed particulars, fast diagnosis.
Specification
|
3D IMAGES |
FOV 10x8 VERSION |
FOV 13x16 VERSION |
|
Detector technology |
Amorphous silicon - CsI with direct deposition |
Amorphous silicon - CsI with direct deposition |
|
Dynamic range |
16 bit (65535 livelli di grigio) |
16 bit (65535 grey levels) |
|
Typical scan time |
14,4 s |
14,4 s |
|
Rotation |
360°/180° |
360°/180° |
|
Image voxel size |
Minimum 75 μm |
Minimum 68 μm |
|
Field of view, diameter x height |
108 x 80 mm |
108 x 50 mm |
|
Available FOV sizes (Øxh) |
6x6 - 8x6 - 8x8 - 10x6 - 10x8 |
6x6 - 8x6 - 8x8 - 10x6 - 10x8 10x10 - 13x8 - 13x10 - 13x16 4x4 - 7x6 (eXtended Functionality) |
|
Typical image size |
495 MB |
820 MB |
|
Minimum scan time |
6,4 s |
3,6 s |
|
Typical X-ray exposure time |
1.6 s (Low-dose QuikScan) - 8.0 s (SuperHD Mode) |
1.6 s (Low-dose QuikScan) - 8.0 s (SuperHD Mode) |
|
Patient alignment |
Servo-assisted: Scout View method |
Servo-assisted: Scout View method |
|
Image format |
Exclusive iRYS and DICOM 3.0 software |
Exclusive iRYS and DICOM 3.0 software |
|
Minimum render times for CB3D data |
15 s on average |
On average, real-time for FOV XF 4x4 QuickScan |
|
CONNECTIVITY |
|
|
Connections |
LAN / Ethernet |
|
Software |
MyRay iRYS and App iPad |
|
Supported protocols |
DICOM 3.0, TWAIN, VDDS |
|
DICOM nodes |
IHE- compliant (Print; Storage Commitment; WorkList MPPS; Query Retrieve) |
